• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

TC449 Exhaust Sleeve

domrvt

domrvt

Husqvarna
AA Class
I've been trying to source this part in order to mount a TC exhaust to my TE, item 5 in the pic:
8000 H5994 Outer Sleeve

It's been back ordered for a while. I have one on order at Bill's. Does anyone know of one in stock somewhere?

Is anyone willing to take some measurements of this part for me, and I'll just make one? I'm anxious to try this 4.1/Megabomb sitting in my garage!

Thanks,
Dom

IMG_1572.JPG
 
Call us, we have one we can measure for you.
ZipTy Racing
7247 Coyote Trail
Oak Hills, CA 92344
Contact us: 760.244.7028
 
Thanks to Tinken and Danny at Zip-Ty for the measurements, I've got my exhaust installed. At least temporarily. Here's what I did, in case anyone's interested:

Bought a bronze sleeve bearing of 2" OD, 1.75" ID, and 1.5" length. I didn't have quick access to a lathe, so a drill in a vice and a dremel had to make due:
lathe.jpeg


Here's the finished product:
finished.jpeg


Installed on the Mega Bomb with the Husky flange:
header.jpeg


Everything installed, along with a carbon shield made by R. Stephen:
IMG_1577.JPG


I just took it for a ride, finally found the 3rd gear power wheelies!
 
man, I'm still waiting for that part too. any chance you could make me one haha? will paypal ya...
 
You must log in or register to reply here.
Back
Top