1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st Swingarm bearings

Discussion in '2 Stroke' started by mantrap, Nov 17, 2008.

  1. mantrap Husqvarna
    AA Class

    Location:
    minnesota
    I am in the middle of some winter maintenance, I pulled off the swingarm to grease it and the bearings are all rusty and need replaced. How do I get them out? Can I press them both out the same side along with the bushing or is there a shoulder separating the bearings?
    mantrap, Nov 17, 2008
    #1

  2. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    They will go out the same side.
    rancher1, Nov 17, 2008
    #2

  3. bendbiker Husqvarna
    B Class

    Location:
    Oregon
    Mantrap, what bike and year? Not that I'll know just curious since I just bought an 08 TE450.
    bendbiker, Nov 18, 2008
    #3

  4. mantrap Husqvarna
    AA Class

    Location:
    minnesota
    I got them out, thanks! Has anyone usesd the allballs kit? It's a 2006 wr250
    mantrap, Nov 19, 2008
    #4