1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

swingarm bearing size

Discussion in 'Vintage/Left Kickers' started by flamepainter78, Dec 5, 2009.

  1. flamepainter78 Husqvarna
    AA Class

    Location:
    norton,ohio
    Hi, What is the swingarm bearing size? for my 1979 390cr so i can get them from my local bearing shop.Thanks Doug.
    flamepainter78, Dec 5, 2009
    #1

  2. Bryll Husqvarna
    AA Class

    Husqvarna Motorcycle:
    Some
    Other Motorcycles:
    Some
    I used 4pcs of "FAG 310-3851" for my CR 500 -83, it might be the same size but I'm not sure.
    Bryll, Dec 5, 2009
    #2

  3. Long Range Husqvarna
    B Class

    Location:
    Bakersfield California
    SIZES: ID: 20mm x OD: 26mm x L: 16mm
    INTERCHANGE: INA=HK 2016 - IKO=TLA 2016Z
    BRAND: IKO / JAPAN

    Doug, I just bought four of these online and installed them in my 82 250XC swingarm. 7.60 each (plus s+h)
    Long Range, Dec 5, 2009
    #3