Stearing head ball bearing sizes, 1976/7 CR125

Hi, I have a CR125 and need to replace the steering head bearings. the bike came as a load of parts and I am reassembling it. I need to know the correct ball bearing size for the steering head.

Thanks Dave

http://www.cafehusky.com/threads/balls.78572/.
Do you have the races Tritrophy on ebay has but they are not cheap.

Yes, I have those races, just need to know the correct sizes of the ball bearings, thanks


http://www.ebay.com/sch/i.html?_fro...RS0&_nkw=races Tritrophy &ghostText=&_sacat=0

3/16" as the thread "balls"

Thanks Stormer, I have ordered some.

Dave

Have you tried a bearing supply house. If I recall correctly thats where I got all my husky bearings back in the day. They were std sizes. Cam

I got them from simply bearings, here in the UK. Supposed to be of good quality, it didn't break the bank, thanks

www.mcmaster.com offers metric ball bearings. There in New Jersey, USA.

I ordered ball bearings for my tractor. It's in imperial size but worn so I installed the next bigger size in metric. The PTO shifts fine.