Hey everyone, Does anyone know a website where I could order new vinyls for my 630? Specifically the ones around the top of the tank? Mine faded from red to orange so I took them off, would kind of like to have a new set in case I want to put something back on it though. Thanks!
I've had good luck with these guys for graphics on my Husaberg, but you may have to contact them directly regarding Husky graphics. Didn't see them listed on their website. They'll print some up with whatever you want on them. http://www.magiksc.com/
Only place I've seen ACTUAL 630 graphics (that fit) come from. I'm sure a custom shop could get you something worked up, but some of the ones that advertise having 630 graphics aren't anywhere close to the right pattern. http://www.race-styles.com/show_category.php?main_kat=53&nr=&lang=en
I was talking more about the 2 vinyls that come stock on the 630's, mine faded so I ripped them off. http://www.motorcyclespecs.co.za/model/husqvana/husqvarna_sm_630.htm If you take a look at that picture, I'm talking about the red vinyls up towards the gas tank. I tried searching around the internet but can't find them, all I get is actual graphic kits like you both are mentioning. Am I out of luck for getting those factory vinyls?
I appreciate both of you linking those though, it gives me something to think about.. I might end up getting something like that if I keep the bike. Still been having trouble with the "stuttering" problem, haven't been able to tune it correctly myself. If I can get it worked out I'll more than likely keep the bike, love it other than that one problem. But it's just such a pain to ride right now, it makes it non-enjoyable for me in its current state.
mine was rubbish until i went out for a huge ride on it, and took some paper, and just kept changing the jd jetting settings one by one until i found a nice group of settings. I did find somewhere once that sold the original graphics, but cant remember where it was now, but at least they are out there.
Think you´ll find what you want in the official parts list. Dealers here tell me that they´re now able to order parts again.
I just bought all new plastics for my TE, I was concerned that since it is a limited edition bike that plastics would be impossible to get later. However my dealer could not source a clutch cover gasket, strange considering you are supposed to remove it to clean screens?
Hey guys, we have the best templates in the world for the 630... drop us an email if you want a full kit, or just parts.... good to go! ScrubDesignz.com