1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Smr449 General Queries

Discussion in '4 Stroke' started by Elliot, Sep 1, 2018.

  1. Elliot Husqvarna

    Husqvarna Motorcycle:
    SMR449
    Hi all

    New to this forum

    I have a 2011 SMR449 and I am about to pick up a sex of aftermarket rims and hubs (super motard) that were fitted to a RE449. My question is - how much stuffing around will
    I have to do to make these fit my tard or will they be a straight bolt in?

    Any and all help appreciated.

    Thanks guys
    Elliot, Sep 1, 2018
    #1

  2. Elliot Husqvarna

    Husqvarna Motorcycle:
    SMR449
    Sorry. Typo. TE449 is the model it’s coming off and it’s a set of rims lol
    Elliot, Sep 1, 2018
    #2

  3. LandofMotards Moderator

    Location:
    Colorado
    Husqvarna Motorcycle:
    2014 TC250
    What brand did you end up going with? If they are for the right bike they should bolt right on. Assuming they have a larger rotor too so you'll need to mount up the brake replicator bracket too
    LandofMotards, Sep 2, 2018
    #3

  4. Elliot Husqvarna

    Husqvarna Motorcycle:
    SMR449
    Hey landofmotards,

    Talon hubs and SM platinum rims.

    Just want to make sure Hub sizing and spacers are the same vwteeen the SMR449 and TE449?
    Elliot, Sep 2, 2018
    #4

  5. LandofMotards Moderator

    Location:
    Colorado
    Husqvarna Motorcycle:
    2014 TC250
    Sorry, that I'm not sure. You would have to look up part numbers on the spacers. Either way, even custom spacers are pretty cheap
    LandofMotards, Sep 2, 2018
    #5

  6. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    The hub and spacers should be the same, the swing arm can be shorter on the SM models though.
    rancher1, Sep 4, 2018
    #6