Sm / Te 630 Rear Axle

Discussion in '610/630' started by T-pole, Sep 19, 2020.

  1. T-pole Husqvarna

    Location:
    Chicago
    Husqvarna Motorcycle:
    2011 630 SMS
    Other Motorcycles:
    Yamaha R1
    Hi, new here.

    I have a 2011 630 SMS. I am looking for pitbull pins for the rear axle, and on their site, they only have them for the TE 630.

    I see there are different part numbers for the axles, so I was wondering if anyone knew what the difference was between the 2.

    Thanks!
    T-pole, Sep 19, 2020
    #1

  2. HuskyBrutha Husqvarna
    AA Class

    Husqvarna Motorcycle:
    SM630
    Other Motorcycles:
    690 R, 500 EXC, XR250
    Looked at my TE and SM today and without pulling the axles from the wheel:

    The measured length and inside diameter of the axles are for all intents and purposes identical on both bikes.
    The axle nut, axle bocks, swingarm ends, spacers and brake caliper etc appear to be identical on both bikes.
    The wheel hubs also appear to be the same

    So from an external examination I would say they the same :thinking:
    HuskyBrutha, Sep 23, 2020
    #2