Rear suspension maintenance on a 2006 TE250

Discussion in 'Technical Reference' started by Coffee, Jan 20, 2009.

  1. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    GO HERE TO DISCUSS THIS THREAD:
    http://www.cafehusky.com/threads/rear-suspension-maintenance-on-a-2006-te250.2161/#post-33503

    Remove brake from swing arm, note one is a sheet metal screw and another is a bolt

    [IMG]

    Support brake

    [IMG]

    Remove brake pedal

    [IMG]

    Remove cover, kickstand, and roller from left side

    [IMG]

    Pic says it all

    [IMG]

    Glad I did the suspension that bolt was a bit dry

    [IMG]

    [IMG]

    All clean, bolt on left needs washer (not shown).

    [IMG]

    There is a bushing with shoulder in swing arm, then washer, then nut all under the plastic covers

    [IMG]


    These grease fittings are nice but not complete - I would not rely on the grease fittings greasing everything.
    Also the file "2006-DOHC-Husky-parts.pdf" is different than what this TE250 had. Here is a nice feature:

    [IMG]