1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

"Racing" wire harness for 08/09 TEs

Discussion in '4 Stroke' started by ScottyR, Apr 13, 2009.

  1. ScottyR Husqvarna
    AA Class

    Location:
    Mitchell, ON
    What do you "lose" with the racing harness? Does the headlight still work?

    All I am looking for is a working headlight and tail-light and a start/off button. I dont want the switch gear for the signals or the wiring mess behind the headlight.


    Thanks
    Scotty
  2. MOTORHEAD Husqvarna
    Pro Class

    Location:
    Mount Vernon, Indiana
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    2014 YAMAHA YZ250
    That's pretty much what you get with the switch. You loose the "dash" and most of the relays and fuses. You can have the horn because they are required for 6 days.
  3. ScottyR Husqvarna
    AA Class

    Location:
    Mitchell, ON
    I am not 100% sure if you get a working headlight or not with the harness? What about the key?
  4. tadgh Husqvarna
    A Class

    you get a rear light, and front light (not the full headlight but the small light above it), the starter button, loose the key and the clutch safety switch plus all the other bits like indicators etc. you should still have the connection to the dash computer.
  5. MOTORHEAD Husqvarna
    Pro Class

    Location:
    Mount Vernon, Indiana
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    2014 YAMAHA YZ250
    Yes, you get a head light, but there is a small toggle switch that you have to add. Check the shop manual, there is a section on installing the race harness.
  6. MOTORHEAD Husqvarna
    Pro Class

    Location:
    Mount Vernon, Indiana
    Husqvarna Motorcycle:
    none
    Other Motorcycles:
    2014 YAMAHA YZ250
    '08 shop manual, page 372 starts the run down on the kit "race" install and 407 has the wiring diagram.