1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Question for Auto owners.

Discussion in 'Vintage/Left Kickers' started by dukkman, Aug 18, 2017.

  1. dukkman Husqvarna
    AA Class

    Location:
    Warwick Queensland Australia
    Husqvarna Motorcycle:
    85/WR 400,86/WR 240,83/430 is mates
    Other Motorcycles:
    69@71/TS90-76/TS100-72/DKW-78/PE
    What's the od and width of the primary clutch ( on crank shaft )?
    The reason being is that I am looking at one off a Husky Quick Cut and it looks interesting.
    dukkman, Aug 18, 2017
    #1

  2. silverstreakNZ Husqvarna
    Pro Class

    Location:
    Christchurch nz
    Husqvarna Motorcycle:
    82cr500,76gp360,90wr250,81 420AXC
    Other Motorcycles:
    74 tm400 , 02 gasgas ec 300
    There's a few sizes . Without being specific the 1st gear clutch is a lot bigger than a quick cut one . Given it has 4x the engine size behind it
    silverstreakNZ, Aug 18, 2017
    #2

  3. dukkman Husqvarna
    AA Class

    Location:
    Warwick Queensland Australia
    Husqvarna Motorcycle:
    85/WR 400,86/WR 240,83/430 is mates
    Other Motorcycles:
    69@71/TS90-76/TS100-72/DKW-78/PE
    Just reread my question and can't seem to be able to find any mention of 1st gear clutches.
    dukkman, Aug 19, 2017
    #3

  4. silverstreakNZ Husqvarna
    Pro Class

    Location:
    Christchurch nz
    Husqvarna Motorcycle:
    82cr500,76gp360,90wr250,81 420AXC
    Other Motorcycles:
    74 tm400 , 02 gasgas ec 300
    1st gear is the same thing as the primary clutch . Could call it either
    silverstreakNZ, Aug 19, 2017
    #4

  5. dukkman Husqvarna
    AA Class

    Location:
    Warwick Queensland Australia
    Husqvarna Motorcycle:
    85/WR 400,86/WR 240,83/430 is mates
    Other Motorcycles:
    69@71/TS90-76/TS100-72/DKW-78/PE
    Woops my mistake , thanks for your help and the measurements.
    dukkman, Aug 20, 2017
    #5