Product announcement - 08 610 adjustable base valves

Discussion in 'Motosportz' started by Motosportz, Feb 9, 2009.

  1. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    We just got the adjustable base valves for the 08 610's in stock. I'll confirm price tomorrow. This allows adjustably to the nonadjustable stock 08 TE610 fork.

    [IMG]
    Motosportz, Feb 9, 2009
    #1

  2. Grump Husqvarna
    A Class

    Location:
    Florida
    Is that all we have to do to make our front forks the way they were supposed to be? :D Or do we need to change the valving too? What weight of rider are the stock forks set up for? I am guessing for an over 200 pounder as they are quite stiff. I guess this means Husky is not going to help us poor 2008 TE610 owners out with the lack of adjusters...
    Thanks,
    Grump
    Grump, Feb 10, 2009
    #2

  3. Grump Husqvarna
    A Class

    Location:
    Florida
    Have you found out the price on these yet and if this is an end user install or forks have to be sent out?
    Thanks,
    Grump
    Grump, Feb 12, 2009
    #3

  4. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    $119 a set, user install.

    Thanks.
    Motosportz, Feb 12, 2009
    #4

  5. Fast1 Husqvarna
    AA Class

    Location:
    Minneapolis, MN
    Are these still available and will they fit the 2011 45 mm 630 forks?
    Fast1, Jun 29, 2011
    #5

  6. Muddy Waters Husqvarna
    AA Class

    Location:
    On the islands
    And is there any difference for the SM610 legs or are we using the same?

    [IMG]
    Muddy Waters, Jun 29, 2011
    #6

  7. jimmyc Husqvarna
    AA Class

    Location:
    pittsburgh pa. USA
    Husqvarna Motorcycle:
    11 TXC449, 09 SM610, WR250, plated
    Other Motorcycles:
    18YZ250X GS1200 busa duc900SS GG
    I'll need two also .
    +2
    jimmyc, Jun 30, 2011
    #7

  8. motosportz mike CH Sponsor

    Location:
    Washington state
    The SM legs are about 1" shorter, but they are basically the same. The compression adjusters should fit. Mike.
    motosportz mike, Jun 30, 2011
    #8

  9. motosportz mike CH Sponsor

    Location:
    Washington state
    Yes we still have a couple of sets and the are for the 45 mm marz shiver forks. Mike.
    motosportz mike, Jun 30, 2011
    #9

  10. Fast1 Husqvarna
    AA Class

    Location:
    Minneapolis, MN
    sent pm for purchase
    Fast1, Jun 30, 2011
    #10

  11. 04asphalt Husqvarna
    AA Class

    Location:
    SW Michigan
    still selling? if not part number for sourcing?
    04asphalt, Mar 11, 2012
    #11

  12. Spice Weasel Husqvarna
    AA Class

    Location:
    UK
    Husqvarna Motorcycle:
    08 SM610
    WOOT!
    I found it.
    Ive been searching ages to find these.
    Are these available? If not, does anyone know where i can get some?
    Thanks.
    Spice Weasel, Apr 1, 2014
    #12

  13. mtne Husqvarna
    AA Class

    Location:
    Denver
    Husqvarna Motorcycle:
    08' TE610 + 08'TE610 sumo'd
    Other Motorcycles:
    KTM 950SE
    Hmm, I'm going to be looking for a set too. But seeing as he hasn't replied to the 2012 or the 2014 questions I may be SOL...........
    mtne, May 1, 2015
    #13

  14. Xcuvator Husqvarna
    Pro Class

    Location:
    Scholls Oregon
    Husqvarna Motorcycle:
    TE450,610 WB165,WR250 WR360 & XC430
    Other Motorcycles:
    yes
    They are the same base valves that the other 45mm forks use on a bunch of other models. ther only difference is the shim stacks.
    Maybe check with Zipty or Bryon at BMP 503 585 1153.
    Xcuvator, May 2, 2015
    #14