1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

piston ring part numbers

Discussion in '4 Stroke' started by dirt rider x, Apr 29, 2009.

  1. dirt rider x Husqvarna
    AA Class

    Location:
    Australia
    I am going to order some engine parts for my 04 TE450

    The parts book shows two part numbers for the piston rings.

    They are 8000A009 and 8000A0855 with a notation by the second number A and the symbol for a British pound.

    How do I know which to use or order?
    Someone suggested one number is the oil ring and one the compression rings but I've never heard of ordering rings that way.
    Thanks in advance for your words of wisdom
    dirt rider x, Apr 29, 2009
    #1

  2. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    That is what I recall... and after 30 minutes of googling I'll give up.

    Hopefully someone will speak up.
    Coffee, May 1, 2009
    #2

  3. raisrx251 Husqvarna
    AA Class

    Location:
    Virginia
    I looked it up on there as well. It looks to me like Number 6 (8000A009) is for the two compression rings and the oil ring. If you look on page 2 it shows all the abbreviations, A is for a Alternate part, maybe from a different supplier I am not sure. The pound symbol I have no idea. My guess would be that you want the part number 8000A009 but your dealer should be able to make sure for you. Hope this helps.
    raisrx251, May 2, 2009
    #3

  4. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    husky used 2 different suppliers, you need to know which one you have, one of the ring sets are thicker.
    rancher1, May 2, 2009
    #4

  5. dirt rider x Husqvarna
    AA Class

    Location:
    Australia
    differnt piston suppliers

    found out today from Hall's you have to know what brand piston the engine has. Mine is an ART (made in Taiwan btw)
    Dont know what the other brand is and not sure how you are supposed to know which part number to order.:banghead:
    frustrating
    dirt rider x, May 6, 2009
    #5

  6. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    How did you find out you have an ART piston? Did you take it apart?
    Coffee, May 9, 2009
    #6

  7. dirt rider x Husqvarna
    AA Class

    Location:
    Australia
    I had it apart already.
    Parts are on the way from Halls
    dirt rider x, May 10, 2009
    #7

  8. Coffee CH Owner

    Location:
    Between homes - in ft Wayne IN
    Husqvarna Motorcycle:
    2006 TE250, 2013 TR650 Terra - sold
    At the risk of stating the obvious: I'm not going to be very happy if I need to tear down my bike, put it out of commission, look at the piston, hope it is marked with who made it, then order & wait for the correct parts.

    frustrating...
    Coffee, May 10, 2009
    #8