1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Need new plastics & seat cover for a 74 CR250 Mag

Discussion in 'Vintage/Left Kickers' started by lavigeboy27, Jul 15, 2016.

  1. lavigeboy27 Husqvarna

    Location:
    Jupiter, FL/Scranton, PA
    Husqvarna Motorcycle:
    1974 Husqvarna 250 CR Mag
    I'm looking for new fenders, number plates and seat cover for my 1974 Husqvarna CR250 Mag. I was wondering the best place to get them?

    Thank you
  2. lavigeboy27 Husqvarna

    Location:
    Jupiter, FL/Scranton, PA
    Husqvarna Motorcycle:
    1974 Husqvarna 250 CR Mag
    Any help? I see there are DC Plastics & Vintage Husky have some. Has anyone ever bought these fenders?
  3. lavigeboy27 Husqvarna

    Location:
    Jupiter, FL/Scranton, PA
    Husqvarna Motorcycle:
    1974 Husqvarna 250 CR Mag
    Please help
  4. Jeff B Husqvarna
    AA Class

    Husqvarna Motorcycle:
    1975wr 250
    Other Motorcycles:
    yamaha ty 175,
    DC Plastics makes good stuff...but, it has no gloss. Stickers will not stick to matte finish very well. Vintage Husky and Huskyjunk both have OEM type stuff. I have bought from all three. I like the plastic that is glossy better. BTW , it is easier to buy a complete seat. Jeff
  5. 87husky500xc Husqvarna
    Pro Class

    Location:
    Dayton NV
    Husqvarna Motorcycle:
    2020 tx300i and a few vintage bikes
    Other Motorcycles:
    77 honda xr-75..
    If you arent super picky about material take it to an upholstery shop and have it recovered. I had my 79 seat done by an upholstery guy for like $50 and it looks awesome.
  6. Leigh Roberts Husqvarna
    AA Class

    Husqvarna Motorcycle:
    1981 CR430
    Other Motorcycles:
    KTM EXC450, SWM RS650R
    Hey Jeff B



    Are Vintage Husky and Huskyjunk still selling plastics? Neither seem to have a fully functioning web site now.

    Anyone else know where to get the glossy plastics?
  7. Vinskord Husqvarna
    AA Class

    Husqvarna Motorcycle:
    400 CR
  8. squid on a 300 Husqvarna
    AA Class

    Location:
    York Springs Pa
    Husqvarna Motorcycle:
    72 WR 250 79 CR 250
    Other Motorcycles:
    GAS GAS 300 Trials 2 KTMs 2 Hodakas
    I bought my 79 rear fender from DC's ebay site...it was a factory second and only $23.00 fit was good..inner fender from DC also.
    for the front fenders on my 79 and 72 I used the Acerbis Nost Front Fender - White 2040370002 $25.00 shipped from Chaparral trough Amazon... I had to fabricate a front fender mount for the 72...number plates I picked up at swapmeets for about $4.00 each...have not bought any seat covers yet...
  9. dumpbear Husqvarna
    AA Class

    Location:
    Shepherd mi.
    Husqvarna Motorcycle:
    360wr burl rep/74works bike/76360wr
    Other Motorcycles:
    goldwing
    I just ordered a set of fenders today for my 81 420ae from RTR will see how they look when they get here the pics look good and Grouty recommended them.Usually on Ebay you can find seat covers relatively inexpensive I prefer a preston petty Tony D mx front fender and a preston petty rear mx for a rider.Good luck
  10. Jeff B Husqvarna
    AA Class

    Husqvarna Motorcycle:
    1975wr 250
    Other Motorcycles:
    yamaha ty 175,
    I just looked. Both huskyjunk and vintage husky websites worked fine for me. Jeff