125-200cc need info: KTM stator swap to CR125

I read dfeckel's post on ktm stator swap w/ lights (98-04 200exc/mxc ,00-04 250 exc/mxc and a few other crossovers)using Moose kit 2112-0214,but appears the kit is nla ...of course. Electrosport kit # ESL-235 is still available but I've heard of many quality issues with them(looks identical to Moose part). I don't want used... got burned too many times . I see from email I got from Moose that they have a Hot Shot Stator kit - for $99.00 on ebay (think RM Electrics makes it) that replaces their old item except it doesn't have the backing plate(good, can't use it on Husky anyway),no sleeve or grommet(not a deal breaker)and no pick up coil(if I'm replacing stator for new, definitely want p/u coil new) Ricky Stator has new pick up for $53.00 ( saw some on ebay for $9.00,but I don't think so!). So while I'm still piecing together my options ,I'd like to hear if anyone has used any of these options and/or have had really good /bad experiences with performance or reliability. Thanks and have a great day!

I ran the Moose M21-0099H on my 2002 CR250 which is just a basic lighting stator. I believe the CR250 uses the same size backing plate as the 125, so it should bolt right up. Let me check the CR125 stator and see if its compatible with it.

BenM, I believe that is the Hot Shot stator (as it's called) from Moose. M21-0099H also shows up under part# 2112-0707. I had my son's '02 CR250 ignition off earlier and the backing plates look similar ,,didn't have the heart to take his and put on mine. Rick Stator is also similar in construction...leaning towards buying from them because I can get a replacement pick up coil at same time.

I believe I have a re-wound ignitor coil stator without the backing plate. I also have a new pick up coil than you can use too. You will need to wire into your connector.

I opted to go new ..bought a RickyStator #RSRM2 stator and even though my pick up coil was good, decided to install their pick up coil #RS0PU2RM well. Wired some extension wire leads to mount CDI under seat (for now) and timed it closely to what another owner did. Starts and runs good but am looking to buy the timing tool (if it is even available- may have to contact some Italian friends to see if they can find one...seem to have a bunch more stuff over there..

Mounted....