1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Mikuni O-ring Mod

Discussion in 'Vintage/Left Kickers' started by motorick, Apr 5, 2019.

  1. motorick Husqvarna
    AA Class

    Location:
    Jacksonville, OR
    Husqvarna Motorcycle:
    1974 400 CR, 1987 250 XC
    Other Motorcycles:
    1973 Norton Commando
    Thanks to Britt Davis at vintagehuskyrestorations.com for doing the o-ring fix to allow the carb to fit like factory to the airbox. No more inner tubes or messy sealant fixes. Very reasonable too! 36mm Mikuni.jpeg
  2. Crashaholic Husqvarna
    Pro Class

    Location:
    Antelope Valley, CA.
    Husqvarna Motorcycle:
    73 450WR 6spd motor in a 75 MK frame
    I purchased a 38mm Mikuni kit which included the intake manifold for my 450 in 1974 and it had the same setup. You're right, the fit is clean definitely the way to go. Can you share how much it was?
    VoodooHusky likes this.
  3. motorick Husqvarna
    AA Class

    Location:
    Jacksonville, OR
    Husqvarna Motorcycle:
    1974 400 CR, 1987 250 XC
    Other Motorcycles:
    1973 Norton Commando

    I bought the carb as well from Britt, but believe he charges around $40 for the o-ring conversion