1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st Marzocchi 45mm shiver Triple Crown Torque.

Discussion in '2 Stroke' started by mr_manny, Nov 20, 2021.

  1. mr_manny Husqvarna
    A Class

    Location:
    Jalisco, Mexico
    Husqvarna Motorcycle:
    wr250
    Did my first fluid change on my Shivers...feels good to make progress on my new-to-me 07 wr250.

    forks.jpg


    Found the following video helpful.

    View: https://www.youtube.com/watch?v=qP_z0exggUk&t=60s


    Manual indicates 15 foot lbs on the triple clamps.

    torque.jpg

    Does anyone reduce their lower clamp torque, as mentioned in the video?

    Maybe it's a GASGAS thing...
    mr_manny, Nov 20, 2021
    #1

  2. flyingbob Administrator

    Location:
    USA
    Husqvarna Motorcycle:
    01 WR360_02 WR250_12 WB165_17 FC350
    Other Motorcycles:
    01 VOR400_07 TM450_22 GG250_07 Tuono
    I always use 12Nm
    flyingbob, Nov 30, 2021
    #2

  3. mr_manny Husqvarna
    A Class

    Location:
    Jalisco, Mexico
    Husqvarna Motorcycle:
    wr250
    12 Nm= 8.85 ft-lb

    Sounds like I should back my back my triple-clamps some...
    mr_manny, Nov 30, 2021
    #3