Magura Clutch Alternative

Hi all,

Quick question,

I have a 2009 TE 310. The pivot broke on the master cylinder side for the clutch. Is there a good alternative as Magura spares are hard to find and the clutch levers are also a pain to find. Do the Brembo units from the KTMs fit and work ok?

there's one on ebay that might work:
http://www.ebay.com/itm/2006-06-Hus...draulic-Clutch-Master-Slave-Line/232290260067

The SWM guys make a magura look alike master cylinder/clutch handle Chinese rip off) and it works well. I understand it will work well with either mineral oil or DOT 4. either way once committed do not change over to the other

Thanks giys

I replaced the master cylinder on my 630. Contacted Magura thru their website and the North America rep contacted me fairly quick. Look for the bore size on the old cylinder and a couple of photos later sent me a parts list. See my thread below for what I encountered. Easy change, lighter clutch pull and no oil leak!

http://www.cafehusky.com/threads/margura-clutch-master-cylinder-replacement.85766/