1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

Looking to get a bit more low end power 2013 TXC250R

Discussion in '4 Stroke' started by Matthew525, Sep 28, 2014.

  1. Matthew525 Husqvarna
    AA Class

    Location:
    New Berlin, WI
    Husqvarna Motorcycle:
    2013 TXC 250R
    Other Motorcycles:
    KTM 525, HONDA CRF150
    2013 TXC 250R
    20 hours
    Open exhaust Map
    FMF power core 4 slip on
    Stock head pipe
    CV4 hoses no thermostat
    Rest of motor is stock

    Looking for more low end power.

    Thinking about buying the FMF head pipe but I only see one
    For the 310. I'm sure I can get it to fit, but is it a worth while investment?
    Other thought is a GET ecu but that is very pricey and don't want to spend money unnecessarily.


    Let me know if there are any worth while mods for this particular bike.

    Compared to my buddy's 310 that is the same but a 14, my 250 has zero low end for popping over trees n such.
  2. mbr440 Husqvarna
    AA Class

    Location:
    Victoria B.C.
    Husqvarna Motorcycle:
    11 TE630 13TE310 14 TXC310
    Other Motorcycles:
    86 VFR750
    I would start by adding a tooth or two to the rear sprocket.
    bax3 likes this.
  3. Wolf Husqvarna
    AA Class

    Location:
    Plantation, FL
    Husqvarna Motorcycle:
    TC and FC 125/250
    Other Motorcycles:
    Yes
    You may want to contact the guys at ZipTy. They know the magic potion....