Looking for 1985 XC 125 clutch cover

Any body have any leads on getting a 1985 XC 125 clutch case?? Just picked up this bike and the antifreeze has eaten up the mag clutch cover pretty bad.

check with "old school Husky shops"
there was a recall on the originals due to corrosion, some received "extra ones"
there were a few NOS one sold this last year on fleabay

IS IT 125 ONLY ?

yes, its an odd part

he has a 125

Still looking....

did you ever do a dealer search???

Just Halls and another place that thinks they have one but can't find it

my dealer had 2
recently as in 2 years ago put them on ebay

16 19 849 01 is the part number

can it be welded up and re machined? or it too far gone?

Ebay,,,, search for it.

Any dirtbike junkyards near you?

I think it's too far gone,
But, I may have to go that route.

Been searching Ebay since I got this bike. No junk yards I know have Husky's.

The '84 part 16 19 849 01 was magnesium and they changed it to 16 19 849 02 aluminum for '85

post a picture of the case inside and outside
might be some brilliant repair ides
lot of clever people here

i pulled this back into operation ok...for a while....i used araldite....coolant got under it. should have used belzona etc or welded and machined

i have epoxyed the waterpump cavity on 2 or 3 of my bikes. one i sold to a friend and never heard a peep out of him about an issue with it, and i still own the other 2 bikes with no issues either.

mine was fine till it sat for a while then the coolant got under it

Couple o f pics