Launch Control/ Holeshot Buttons

Discussion in 'Super Moto' started by Super5onic88, Feb 6, 2014.

  1. Super5onic88 Husqvarna
    AA Class

    Location:
    Perth, Australia
    Husqvarna Motorcycle:
    SMR 449
    Other Motorcycles:
    RGV 250
    Hey all,

    I've had a bit of a browse about in some accessories catalogs and on the net for Launch Control/ Holeshot Buttons to suit our 50mm SMR forks but haven't found any so far.

    Those of you that have one what brand is it and who was the supplier?

    Cheers
  2. Caiman Senior Vice Procrastinator

    Location:
    Australia
    Husqvarna Motorcycle:
    SWM SM500R
    I've got one for the Zoke 50's in my tool box, haven't fitted it yet. It's OEM off of an SMR450RR/TC450, any dealer should be able to get one if you don't mind waiting, was around $80.

    Part# can be found in the parts fiche for the above bikes.
  3. Motosportz CH Sponsor

    Location:
    Vancouver WA
    Husqvarna Motorcycle:
    2021 TE250i, 570 Berg, 500 KTM, 790R
    Other Motorcycles:
    many
    I bet there is piles of free unused ones around. I might even have one.
  4. Super5onic88 Husqvarna
    AA Class

    Location:
    Perth, Australia
    Husqvarna Motorcycle:
    SMR 449
    Other Motorcycles:
    RGV 250
    Mother of God.
    TrooperLu's has them listed for $161.30 minus postage!
  5. cjoecruz003 Husqvarna
    AA Class

    Location:
    Vacaville, Ca
    Husqvarna Motorcycle:
    2006 SMR510
    Free??? I'll give $20 then...
  6. Caiman Senior Vice Procrastinator

    Location:
    Australia
    Husqvarna Motorcycle:
    SWM SM500R
    I got mine from the US last time I ordered a bunch of OEM parts, fire off an email to Halls or Bills.
  7. Super5onic88 Husqvarna
    AA Class

    Location:
    Perth, Australia
    Husqvarna Motorcycle:
    SMR 449
    Other Motorcycles:
    RGV 250
    Just ordered through Halls with some other bits too. Almost half the Aus price.
  8. R. Stephen Husqvarna
    Pro Class

    I made some custom to fit on the largest portion of the fork leg. I've been using this design for a year now and made a few for friends. The other style usually mounts on the second seal land on the fork and are hard to latch in place at the start line. You can see the ring in this photo on the right fork leg. I run the new style Works launch device. works great.

    Photo Apr 20, 2 00 04 PM.jpg
    DErZ likes this.