Kill Switch Wiring

Discussion in '610/630' started by Eoin, Aug 8, 2019.

  1. Eoin Husqvarna
    AA Class

    Location:
    Gainsborough
    Husqvarna Motorcycle:
    TE630, TE250
    Other Motorcycles:
    Africa Twin AS
    I want to mount a tethered magnet kill switch on the bars and need to break into the wiring. In the sheath running from the RH switch, I have 4 wires, but the colours don't match the wiring diagram. For the kill switch I should have Grey positive and Brown - White earth. In the sheath I have Blue, Brown, Blue - Yellow and Brown - Black. Anyone know which 2 are for the kill switch?

    Edit: TE630.
    Eoin, Aug 8, 2019
    #1

  2. Hurky Husqvarna
    AA Class

    Location:
    Spain
    Husqvarna Motorcycle:
    WR300 2010
    Other Motorcycles:
    Yamaha WR480F 2008
    Your best bet is to get an multimeter and test which cables correspond to the kill switch.
    Hurky, Aug 9, 2019
    #2

  3. Eoin Husqvarna
    AA Class

    Location:
    Gainsborough
    Husqvarna Motorcycle:
    TE630, TE250
    Other Motorcycles:
    Africa Twin AS
    I was just hoping to avoid taking stuff apart.
    Eoin, Aug 9, 2019
    #3

  4. Eoin Husqvarna
    AA Class

    Location:
    Gainsborough
    Husqvarna Motorcycle:
    TE630, TE250
    Other Motorcycles:
    Africa Twin AS
    The kill switch wires (on mine at least) are blue-yellow and brown.
    Eoin, Aug 12, 2019
    #4