1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Kill switch routing late 70's bikes

Discussion in 'Vintage/Left Kickers' started by Houredout401, Feb 7, 2017.

  1. Houredout401 Husqvarna
    AA Class

    Location:
    New England
    Husqvarna Motorcycle:
    '77 CR250 '78WR250
    Other Motorcycles:
    '76MR250 '83IT250 '84 IT490 '69CT70
    down the handlebar then down the left side of frame between tank and frame?
    Houredout401, Feb 7, 2017
    #1

  2. Houredout401 Husqvarna
    AA Class

    Location:
    New England
    Husqvarna Motorcycle:
    '77 CR250 '78WR250
    Other Motorcycles:
    '76MR250 '83IT250 '84 IT490 '69CT70
    Anyone??
    Houredout401, Feb 10, 2017
    #2

  3. Marcgregory Husqvarna
    C Class

    Location:
    St. Louis, MO
    Husqvarna Motorcycle:
    '76 WR250, '76 WR360, '77 360 Auto
    That is how I do mine
    Marcgregory, Feb 10, 2017
    #3

  4. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    Yeap , leave enough length so it doesn't pull tight when you turn the bars.. and your good to go
    ruwfo, Feb 10, 2017
    #4

  5. grouty Auto Lover ...

    Location:
    South West UK
    Husqvarna Motorcycle:
    78 390WR, 78 390 AMX, 500 Humph
    Other Motorcycles:
    works 73 CCM 520, another 73 CCM520
    Yes.
    grouty, Feb 10, 2017
    #5

  6. Houredout401 Husqvarna
    AA Class

    Location:
    New England
    Husqvarna Motorcycle:
    '77 CR250 '78WR250
    Other Motorcycles:
    '76MR250 '83IT250 '84 IT490 '69CT70
    Thanks!
    Houredout401, Feb 10, 2017
    #6