1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Identifying plugs on '10TE250 Meo Replica

Discussion in '4 Stroke' started by Xicobombas, Jan 23, 2017.

  1. Xicobombas Husqvarna
    A Class

    Location:
    Portugal
    Husqvarna Motorcycle:
    '17 TE 250
    Other Motorcycles:
    '08 Kawasaki ER6N
    Have 2 plugs which I don't know what they are for.
    In the photo attached, there are 2 red circles of 2 plugs.
    The left red circle, I believe it's the PU plug from the O2 sensor which I don't have, as you can see in the exaust pipe.
    What about the right red circle plug ?? what is for ?

    Best regards
    Ricardo

    Attached Files:

    Xicobombas, Jan 23, 2017
    #1

  2. Xicobombas Husqvarna
    A Class

    Location:
    Portugal
    Husqvarna Motorcycle:
    '17 TE 250
    Other Motorcycles:
    '08 Kawasaki ER6N
    For the record, I don't have any dash installed. The previous owner installed a TXC wiring.

    Is the other end plug for the cooling fan, since it's not installed ?
    Or for map switch, since I have EFI ?

    As for last resort, I'll have to dismount everything arround it and look for the other end connection.
    Xicobombas, Jan 24, 2017
    #2

  3. JonXX Administrator

    Location:
    Bill's Motorcycles Plus
    Husqvarna Motorcycle:
    360CR 360WR SM610 TC450 TXC250 TC250
    Other Motorcycles:
    Hondas, Harleys, Yammys & a squid
    The right plug is for the radiator fan that isn't there any more.
    JonXX, Jan 26, 2017
    #3

  4. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    The other one looks like the power up resistor to put the computer into power up mode.
    R_Little, Feb 14, 2017
    #4