1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Husqvarna Te310 Smoking After Oil Change?

Discussion in '4 Stroke' started by Mark1256, Mar 15, 2020.

  1. Mark1256 Husqvarna

    Husqvarna Motorcycle:
    Husqvarna te310
    Other Motorcycles:
    Yamaha wr450
    Hi guys,
    I recently bought a husqvarna te310 2013.
    After my first ride i changed the oil and filter and since then it has started smoking! Its mainly on first start up or if its cold...

    Does anyone know why?

    The oil is A9 racing semi synthetic 10w50
    Mark1256, Mar 15, 2020
    #1

  2. Giack Husky310R Husqvarna
    A Class

    Location:
    Piemonte, Italy
    Husqvarna Motorcycle:
    2X TE310R 13' - WR300 10'
    Other Motorcycles:
    Sherco SEF 300 Factory CHracing
    I've only ran mine for 45 minutes (all heat cicles) and it smokes a little but is vapor (H2O) and it doesn't smell of oil, as engine is warm is no longer noticiable. A9 racing oil is crap (for me), use good reliable known oil and for Ital Husky's 0W40 mobil1 FS or 5W40 motul 300V are the best
    Giack Husky310R, Mar 16, 2020
    #2

  3. Soderberg Husqvarna
    AA Class

    Location:
    Skellefteå
    Husqvarna Motorcycle:
    2014 TE 310r
    Other Motorcycles:
    Gasgas ec250 -18, Yamaha WR250F
    I dont know much about A9 but as far as I know they are not known for expensive racing stuff. In the daily from a to b car I dont care. Just using average 5w-40 or 10w-40. In my bikes I use premium oils. In my case Midland but you cant buy that outside northern Europe as far as I know. Change to Castrol or some other premium oil. I think you have the problem there.
    Ola
    Soderberg, Mar 16, 2020
    #3
    Giack Husky310R likes this.