1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

Headlight

Discussion in '4 Stroke' started by Guy Houck, Jan 13, 2020.

  1. Guy Houck Husqvarna
    C Class

    Husqvarna Motorcycle:
    2008 TE510
    Anyone know of a LED bulb that will fit a 2008 TE510 headlight ?
    Guy Houck, Jan 13, 2020
    #1

  2. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    Dirtdame, Jan 14, 2020
    #2

  3. 268fords Husqvarna
    Pro Class

    Location:
    Powell, Wyoming
    Husqvarna Motorcycle:
    08' TE510'
    Other Motorcycles:
    Honda CRF 100, Kawasaki KLX 110
    Unfortunately you may not be happy with the light output. The 08’ headlight housing is just a poor design for light distribution. Many years ago I gave up on the stock housing and installed a trailtech X2 dot headlight. I should have gone with the Offroad one instead. The low beam is a projector and I wasn’t happy with it. I ended up modding a led podlight to fit where the projector went. Now it has a great short distant light with a great high beam. I wired mine so both stay on when the high beam is on. Plus side is the led cuts through the dust at night where the halogen reflects off of all the dust particles.
    268fords, Jan 23, 2020
    #3

  4. Guy Houck Husqvarna
    C Class

    Husqvarna Motorcycle:
    2008 TE510
    Thanks for the info , I did buy a bulb on eBay last week. It is bright to look at but i agree with you 268fords , it doesn’t get the light on the ground. I don’t ride at night very much but I might be looking at a different light .
    Guy Houck, Jan 26, 2020
    #4