1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    WR = 2st Enduro & CR = 2st Cross

All 2st going from Rotor straight to Coil, to CDI?

Discussion in '2 Stroke' started by 91husky, Sep 8, 2016.

  1. 91husky Husqvarna

    Husqvarna Motorcycle:
    wmx250
    hello all, i have a 91 wmx250, recently i had to buy a new coil and came to find that there are nearly no cheaper replacements than a $100 Refurbished coil or a $50 used one. So, is there a swap to go from Old school to CDI? i have a 3 wire rotor so can i just wire that directly into a cdi and make it work with a cheaper coil ? Any input is appreciated, Thanks
  2. 2premo Husqvarna
    Pro Class

    Location:
    Northern NV
    Husqvarna Motorcycle:
    98 WR360, 1987 WR430, 1988 XC430
    Other Motorcycles:
    Sherco 300, 2002 KTM 380EXC
    which ignition is in it
    pretty sure some had the last of the Motoplat
  3. justintendo klotz super techniplate junkie

    Location:
    mercer, pa/northwest pa
    Husqvarna Motorcycle:
    84 250,86 400,87 430,88 250,95 360
    Other Motorcycles:
    99 kawasaki zrx 1100
    i think he has the motoplat "mini 4"....good luck! the prices the op stated are fair, as they are hard to find. yes you need all 3 components to run