1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Gearing effects

Discussion in 'Vintage/Left Kickers' started by Husq.fleet, Feb 25, 2010.

  1. Husq.fleet Husqvarna
    AA Class

    Location:
    Pendleton Oregon
    My 82 CR250 has a badly worn kicker gear on the back of the clutch and the clutch drive gear is worn thru the hardsurface also. I dont have a good spare, my other 250 looks the same. What I do have is two very nice clutch's, gears from a 83-84 500. I see that the primary ratio is different between the 250 and the 500. The 83-500XC set up I have is near perfect and I would like to use it if it isnt going to goof up the primary gearing too bad, anybody tried this before?? Thanks in advance, Scott