Found this in my engine

Discussion in '610/630' started by mandolin, Sep 4, 2021.

  1. mandolin Husqvarna
    AA Class

    Location:
    Hungary
    Husqvarna Motorcycle:
    SM 610 ie '09
    I recently heard some noise on the generator/stator side,decided to crack it open and found this metal parts..
    any ideas where it's from ?

    if i put the pices togehter,a looks like cylinder shape part..

    . 241485694_400439531430199_818027479230539395_n.jpg 241520615_571411594295033_932379291991864575_n.jpg
  2. mandolin Husqvarna
    AA Class

    Location:
    Hungary
    Husqvarna Motorcycle:
    SM 610 ie '09
    the engine runs ok,no noise,smoke or anything else
    Tolga610 likes this.
  3. mandolin Husqvarna
    AA Class

    Location:
    Hungary
    Husqvarna Motorcycle:
    SM 610 ie '09
    it's something from the starting sistem area...because it broke down after several atempts to start the engine,and it backfired
  4. mandolin Husqvarna
    AA Class

    Location:
    Hungary
    Husqvarna Motorcycle:
    SM 610 ie '09
    then it went below in the generator area
  5. mandolin Husqvarna
    AA Class

    Location:
    Hungary
    Husqvarna Motorcycle:
    SM 610 ie '09
    Here it is :

    241430972_4157174441046345_5335113089635035423_n.jpg 241430972_4157174441046345_5335113089635035423_n.jpg 241362452_434588087938916_1570344281041521488_n.jpg 241214521_525789275388775_5232263574290009333_n.jpg 241227719_4411198482274172_5856359685466157915_n.jpg
    NvRider55 likes this.
  6. somesuch Husqvarna
    AA Class

    Location:
    Santa Clara CA
    Thank you for posting it, we all benefit from the knowledge. I have never seen a failure like that on a 610