1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Extra Extra Wide Foot Pegs

Discussion in 'Vintage/Left Kickers' started by husky jim, Nov 19, 2015.

  1. husky jim Husqvarna
    Pro Class

    Location:
    USA
    Husqvarna Motorcycle:
    14 WR300, 87 430wr, 86 430ae, Tr650
    Found these on ebay! They are even wider than the IMS pegs. Anyone recognize the maker?

    peg4.png

    peg6.png

    peg7.png
  2. everfree Husqvarna
    Pro Class

    Location:
    Bend, Oregon
    Husqvarna Motorcycle:
    86 430AE (2), 88 430AE, 87 430WR (2)
    Other Motorcycles:
    87 250 XC, 87 430 CR, '17 GG 300
    No.
    Do they fit without grinding?

    Jim, could you post the eBay link?
    Thanks.
  3. jo360 Husqvarna
    AA Class

    Location:
    perth australia
    Husqvarna Motorcycle:
    1983 exc framed wr430 engine
    Other Motorcycles:
    ktm 520exc
    Never heard of them looks like a two part with the angle iron reinforcing plate welded in and ground back.
  4. husky jim Husqvarna
    Pro Class

    Location:
    USA
    Husqvarna Motorcycle:
    14 WR300, 87 430wr, 86 430ae, Tr650
    everfree likes this.
  5. 84scrambler Husqvarna
    Pro Class

    Location:
    mid Florida
    Husqvarna Motorcycle:
    87 xc 250, 85 wrx 250, 79 wr 250
    Looks like some one added the small top piece where it rests on the frame. The pegs are cast and some one welded the piece to it and it looks like mild steel that's why you can see the surface rust starting to form only on that piece.