1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

All 2st Expensive parts

Discussion in '2 Stroke' started by rockdancer, Jul 20, 2016.

  1. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    I got a suspension linkage part
    They didn't give me a price - was thinking $10
    Nearly fell over - $39
    looks like its been sitting around for a long time too.

    Hope this is not a sign of things to come for older Husky parts

    Attached Files:

    rockdancer, Jul 20, 2016
    #1

  2. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Lower shock bush? Who from r&d?
    shawbagga, Jul 20, 2016
    #2

  3. NCSteve Husqvarna
    Pro Class

    Location:
    Appalachia
    Husqvarna Motorcycle:
    12 WR300 13 WR165
    Other Motorcycles:
    02 XR250R 00 XR100R
    ouch! Still @ $10 and $15 here.
    NCSteve, Jul 20, 2016
    #3

  4. Dirtdame Administrator

    Location:
    Rock Springs Wy
    Husqvarna Motorcycle:
    11 WR300,13 WR125,18 FE501
    Other Motorcycles:
    17 Beta Xtrainer
    Yep. I think I paid less than 40 bucks for the bushing, needle bearing and o-rings for my TE450.
    Dirtdame, Jul 20, 2016
    #4

  5. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Welcome to Australia folks!
    shawbagga, Jul 20, 2016
    #5

  6. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    MPE - said it cost em $31
    rockdancer, Jul 20, 2016
    #6

  7. rockdancer Husqvarna
    Pro Class

    Location:
    Sunshine Coast, Australia
    Husqvarna Motorcycle:
    2013 WR125, 2019 FE350
    The bearing part was completely gone - wasn't there!
    The shock was moving up and down
    rockdancer, Jul 20, 2016
    #7

  8. NCSteve Husqvarna
    Pro Class

    Location:
    Appalachia
    Husqvarna Motorcycle:
    12 WR300 13 WR165
    Other Motorcycles:
    02 XR250R 00 XR100R
    $39aus is @ $29us, so twice as much or more than we pay :eek:
    NCSteve, Jul 20, 2016
    #8

  9. shawbagga Husqvarna
    Pro Class

    Location:
    Eaton, Western Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    2018 Gasgas XC250
    Stefan at r&d normally pretty good price wise I've found
    shawbagga, Jul 20, 2016
    #9
    ohmygewd likes this.

  10. ohmygewd Husqvarna
    Pro Class

    Location:
    Melbourne, Australia
    Husqvarna Motorcycle:
    13'Berg FE350, 96'WR360, 01 WR250
    Other Motorcycles:
    Aprilia RSV1000
    Bloody hell...you don't know a fitter and tuner or a lathe Rocky?? My mate turned up that bush for me on his home lathe!!

    As far as the price, the all balls bearing kit cost $36 from mxstore but without the bushing...the same kit fits my 95/96 WR360, 2K WR250
    ohmygewd, Jul 20, 2016
    #10

  11. Rob09 Husqvarna
    AA Class

    Location:
    Sydney, Australia
    Husqvarna Motorcycle:
    TE 511

    This^

    Stefan has looked after me with parts for years.
    Rob09, Jul 21, 2016
    #11
    ohmygewd likes this.

  12. Rickyme Husqvarna
    AA Class

    Location:
    Sydney Australia
    Husqvarna Motorcycle:
    Terra 650, WR300 both 2013
    Other Motorcycles:
    Yamaha TTR 600 Belgarda
    I priced up a swing arm bearing kit yesterday about 120, reckon I should grab that kit now
    Rickyme, Jul 21, 2016
    #12