DR650 rear hub for TE630/SWM650

Discussion in '610/630' started by ghte, Feb 7, 2017.

  1. ghte Husqvarna
    Pro Class

    Location:
    Bright, Victoria Australia
    Husqvarna Motorcycle:
    2 x 310's, 2016 Beta 480, SWM RS650
    Other Motorcycles:
    2016 Multi ,Griso1100, Monster695
    Guys can a Suzuki DR650 hub be laced to a Husky/SWM 18" rim. I am keen to use their cush hub for added engine protection. Also is there any machining re axels and spacers etc.

    Cheers and Thanks
    ghte, Feb 7, 2017
    #1

  2. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    Looks like you will be the pioneer on this one, good luck!
    rancher1, Feb 7, 2017
    #2

  3. Stujam Husqvarna
    A Class

    Location:
    Brisbane Austrlia
    Husqvarna Motorcycle:
    09te610, 11te630
    I was sure dr650 was 17 inch?

    A older te610e has cush which will work or thalon do a rim n cush hub to suit which would be easier
    Stujam, Feb 8, 2017
    #3

  4. ghte Husqvarna
    Pro Class

    Location:
    Bright, Victoria Australia
    Husqvarna Motorcycle:
    2 x 310's, 2016 Beta 480, SWM RS650
    Other Motorcycles:
    2016 Multi ,Griso1100, Monster695
    Hi Mate. The DR is a 17 rear, but an 18 will lace up ok.
    I note with interest the Thalon option and will chase that down. Thank you for following through.
    Cheers.
    ghte, Feb 8, 2017
    #4

  5. kirbybikes Husqvarna
    AA Class

    kirbybikes, Feb 9, 2017
    #5

  6. ghte Husqvarna
    Pro Class

    Location:
    Bright, Victoria Australia
    Husqvarna Motorcycle:
    2 x 310's, 2016 Beta 480, SWM RS650
    Other Motorcycles:
    2016 Multi ,Griso1100, Monster695
    Cheers and thanks Kirby.
    ghte, Feb 9, 2017
    #6

  7. Chickenasana Husqvarna
    A Class

    Husqvarna Motorcycle:
    '08 TE610 (Shadynasty)
    Other Motorcycles:
    '08 SV650 Suzi / '92 XT225 Bissicle
    I'm very curious what option you choose! Let us know how it works out!
    :cheers:
    Chickenasana, Mar 27, 2017
    #7