Clutch perch for TE610?

Discussion in '610/630' started by ScottyR, Apr 22, 2009.

  1. ScottyR Husqvarna
    AA Class

    Location:
    Mitchell, ON
    Does anyone know if there is an aftermarket clutch perch that will work for a 2000 TE610? I need one that works with the decomp release.


    Thanks
    Scotty
    ScottyR, Apr 22, 2009
    #1

  2. Doormandan Husqvarna
    A Class

    Location:
    So Cal
    Look at the ASV CLM05-K it has a hot start lever that I used for the choke.
    Dan L:cheers:
    Doormandan, Apr 22, 2009
    #2

  3. fatboycrash Husqvarna
    AA Class

    Location:
    Central Queensland Australia
    Husqvarna Motorcycle:
    2007 TE610
    Other Motorcycles:
    1997 Ducati 900ss
    Gudday
    Don't muck about... I've tried multiple aftermarket perches and levers on my Huskys over the years. In the end the only ones I've found that work well and fit well are the Italian Domino ones. Pretty much what they came stock with.

    Like this

    http://www.offroadimports.com.au/index.htm

    Click on Domino. Cable lengths match etc and pretty tough gear.

    BUT if it's a pre 1985 Husky then go Magura
    fatboycrash, Apr 25, 2009
    #3