California Hurtin'

Discussion in 'Common Items on Husqvarnas: Tires/tubes/grips/etc' started by gordo81, Jun 17, 2021.

  1. gordo81 Husqvarna
    AA Class

    Location:
    Ventura CA
    Husqvarna Motorcycle:
    630 SMS
    Other Motorcycles:
    V-ROD. 1974 Yahama trials
    A couple of things here, 2011 630 SMS. Only 3800 miles. I've done the oil and filters my self but its time to have it professionally tuned up. A few of the issues is here in Ventura the only Husky dealership/mechanic in Simi Valley will not touch any Husky older than 14" when they got bought out. Also I replaced the air filter and the bike started to aggressively start smoking and almost caught fire, yes I did use proper and not too much filter oil. I noticed that the breather on the back side of the airbox was disconnected, and saw another form stating it was a crank case breather and if a lot of wheelies are done it will leak oil? Kinda stumped. Also I need new side plastics. I not a big dude 5'8" @ 170lbs but somehow the plastic tabs broke off and the bottom of the plastics just rest on the pipes and also start melting.
  2. Clete Husqvarna
    AA Class

    Location:
    Tigard, OR
    Husqvarna Motorcycle:
    '01 CR/WR 250, '13 650 Terra
    Other Motorcycles:
    '06 Suzuki SV650 (gone)
    Hope you find some help on this.