1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

Baselines for startup

Discussion in 'Vintage/Left Kickers' started by Chef, Mar 25, 2010.

  1. Chef Husqvarna
    AA Class

    Location:
    Ontario, Canada
    Husqvarna Motorcycle:
    08 Cr165, 09 Wr165
    Other Motorcycles:
    01 Husaberg FE650, 07 BMW 650 Dakar
    Well my 1976 wr360 is about ready for startup. I bought it as a basket case and I now have everything to the point that I should see if I can get it to run. Does anyone have any advice on ignition timing, carb settings etc. that might help me to get this going. Huskies were the shizzle when I was a kid and I can't wait to thear this thing.:applause:

    Thanks in advance
    Chef
    Chef, Mar 25, 2010
    #1

  2. Bryll Husqvarna
    AA Class

    Husqvarna Motorcycle:
    Some
    Other Motorcycles:
    Some
    Factory setting for the -76 360 ignition is set to 22 degrees (3,02mm) advance
    Bryll, Mar 26, 2010
    #2

  3. oldhuskychuck Husqvarna
    A Class

    Location:
    Denver Co
    i set mine just as it hits TDC, at the start of the peak so to speak.
    oldhuskychuck, Mar 27, 2010
    #3