Automatic bearings

Somebody knows the dimensions and #of the bearings
near freewheels 360-390-420-430-500 ?

The bearings on crankshaft in 1st clutch drum 430/500 is 25 id x 29 ed x17 mm

Thanks

http://www.cafehusky.com/threads/1977-360-auto-gearbox-gremlins.90839/page-2#post-662370
post 12

Thanks DFA.
The most difficult to get seems to be the big bearing near the big freewheel (70/78 mm) in 360/390.

Have you tried Jef Bens Michel?

No, but I'd like to find them on a bearings retailer with the measurements.

https://www.galaparts.de/Ersatzteilsuche/HUSQVARNA/93/161258301-ele
May be the one! You could probably drive there!!
https://www.galaparts.de/Originalteile/HUSQVARNA/93
And a Whole lot More!!

The 420 uses fe438z fe458z and fe478z for 2 3 4 gear
The 30x38 50x58 70x78 . All just under 12 mm wide

They are all available from GNM bearings and are the oem bearings . Lot cheaper than nos

Thanks but I was talking about the bearings, not the freewheels.

Still very good to know!! Thanks Chris

The bearing are those same sizes
Or do u mean the shaft to case bearings ?

I mean the bearings the same size(50x58x9.2 , 70x78) that the freewheels .

oh crap! that spring is missing a hook!!

Got loads of them in the shed if you want a few