1. 2 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     WR = 2st Enduro & CR = 2st Cross

125-200cc Actual part number for inner 150cc Cylinder head o-ring?

Discussion in '2 Stroke' started by Joedints, Apr 10, 2018.

  1. Joedints Husqvarna
    AA Class

    Location:
    Medford, New Jersey
    Husqvarna Motorcycle:
    11 WR300 13 WR125 81 WR430 82 CR250
    Other Motorcycles:
    Kawasaki ZR7-S
    Looking for the part number to the inner oring for the cylinder head for a 2013 WR150. the parts manual lists the same # oil seal number for the PV shaft o ring.JPG
    Joedints, Apr 10, 2018
    #1

  2. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    It is the same as the 125.
    rancher1, Apr 10, 2018
    #2
    shawbagga likes this.

  3. Joedints Husqvarna
    AA Class

    Location:
    Medford, New Jersey
    Husqvarna Motorcycle:
    11 WR300 13 WR125 81 WR430 82 CR250
    Other Motorcycles:
    Kawasaki ZR7-S
    The outer is the same # but inner should be different as it is a bigger bore
    Joedints, Apr 11, 2018
    #3

  4. johnnyboy Husqvarna
    Pro Class

    Location:
    UK
    Husqvarna Motorcycle:
    WR 125
    Other Motorcycles:
    TM 250f
    Both the same on both engines.
    johnnyboy, Apr 12, 2018
    #4

  5. rancher1 Husqvarna
    Pro Class

    Location:
    WA
    They are the same, I think the 165 even uses the same one.
    rancher1, Apr 12, 2018
    #5
    shawbagga likes this.

  6. NCSteve Husqvarna
    Pro Class

    Location:
    Appalachia
    Husqvarna Motorcycle:
    12 WR300 13 WR165
    Other Motorcycles:
    02 XR250R 00 XR100R
    NCSteve, Apr 12, 2018
    #6
    shawbagga likes this.