250-500cc 96 WXC clutch plates

Hoping someone can point me in the right direction. I’ve been searching for an aftermarket clutch kit for a 96 WXC 250 without much luck. I’ve read that possibly Honda Cr250 friction plates will work. Can anyone confirm this and If so what year Honda plates I should order. Thank you.

95 cr 250 friction plates will work but you need 1 extra plate because husky use 8 plates.
Good lucck.

Thank you I'm going to give these a try

This was good information, thanks again. I ordered a complete clutch kit for a 95 Honda CR250 and both the steel plates and friction plates fit perfectly. The springs from the kit are too long so I couldn't use them. My WXC only uses 7 frictions so I had one left over as the Honda must use 8.

Let us know how it works !