1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

86 forks

Discussion in 'Vintage/Left Kickers' started by david gross, Mar 26, 2020.

  1. david gross Husqvarna
    AA Class

    Location:
    New Zealand
    Husqvarna Motorcycle:
    2008 WR250 1984 WR250
    Other Motorcycles:
    1979 GS750
    Hi guys striping down the forks on my 84 it has an 86 front end i believe any easy wee mods i can do while they are apart . suggestion of SAE and capacity.OK looking like it may be an 88 fork?.

    Stay Safe people .

    Dave P1010337.JPG
    Steve-F likes this.
  2. ajcmbrown Husqvarna
    Pro Class

    Location:
    Metung Victoria Australia
    Husqvarna Motorcycle:
    400WR 250WR 07 WR500 430AE 360AE
    Other Motorcycles:
    1985 500CR Ducati Multistrada 1200S
    Looks to be e twin piston caliper, which would make it 87/88, different fork internals, wheel and rotor.
    david gross likes this.
  3. VoodooHusky Husqvarna
    A Class

    Location:
    15 Miles North of Hangtown
    Husqvarna Motorcycle:
    1983 Husqvarna 250 CR
    Other Motorcycles:
    2018 Husqvarna FE 450
    Yes 87/88 WR forks. I have a set of new to me 87 XC forks apart now for a complete rebuild before I install them on my 83. Post photos of the damping rods and stanchion tubes to determine if they are 87 or 88. I believe the 88's have additional holes in the stanchion tubes.
    ajcmbrown and david gross like this.
  4. david gross Husqvarna
    AA Class

    Location:
    New Zealand
    Husqvarna Motorcycle:
    2008 WR250 1984 WR250
    Other Motorcycles:
    1979 GS750
    P1010422.JPG
  5. VoodooHusky Husqvarna
    A Class

    Location:
    15 Miles North of Hangtown
    Husqvarna Motorcycle:
    1983 Husqvarna 250 CR
    Other Motorcycles:
    2018 Husqvarna FE 450
    I'm no expert on this but the stanchion tubes look like 87. I believe the 88 has more holes in it. Maybe someone else can confirm.
    david gross likes this.