1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

83, 84 CR rear brake lever

Discussion in 'Vintage/Left Kickers' started by cognitive 390, Oct 12, 2014.

  1. cognitive 390 Husqvarna
    AA Class

    Anyone know if a 1983, 84 CR rear brake lever fit a 1980 CR?
    cognitive 390, Oct 12, 2014
    #1

  2. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    I pretty sure there the same , look at my 80 390 on vs the 84 500 I had.

    100_2328.JPG

    100_2414.JPG
    ruwfo, Oct 15, 2014
    #2

  3. cognitive 390 Husqvarna
    AA Class

    I admit they look close to the same. Thanks!
    Also, who had the Pro Circuit Husqvarna stickers for sale? Can't find him for some reason. I thought it was Coffee but I get no response.
    cognitive 390, Oct 15, 2014
    #3

  4. adam6402 Husqvarna
    AA Class

    Location:
    Tulsa, OK
    Husqvarna Motorcycle:
    None
    I think HWY (aka Art) use to sell them along with other reproduction husky graphics, although have not seen him post anything in the Vintage section in a long time. He use to be. Mini sponsor.
    adam6402, Oct 16, 2014
    #4

  5. dartyppyt Husqvarna
    Pro Class

    Location:
    Illinois
    Husqvarna Motorcycle:
    17 TE 150, 82CR 500
    Other Motorcycles:
    82 125,250,430&500 79 390 83 250
    I think this answers your question:

    Attached Files:

    dartyppyt, Oct 16, 2014
    #5

  6. ruwfo Administrator

    Location:
    NJ
    Husqvarna Motorcycle:
    1980 390CR, 1982 430CR, 1984 400WR
    Other Motorcycles:
    1985 250XC, 2016 FJ-09
    I think this answers your question:

    pretty sure he was asking about the brake pedal (lever) , not the brake rod. But while where talking (brake rod) ,I've use
    the all aluminum one on the single shocker on the early bikes too. My 82 430 has a 85 .
    ruwfo, Oct 17, 2014
    #6

  7. dartyppyt Husqvarna
    Pro Class

    Location:
    Illinois
    Husqvarna Motorcycle:
    17 TE 150, 82CR 500
    Other Motorcycles:
    82 125,250,430&500 79 390 83 250
    Ok, gotcha!

    It should and gives it more factory look.

    I can compare tonight for you. I have this one and can put it on the 80 frame?

    Attached Files:

    dartyppyt, Oct 17, 2014
    #7

  8. cognitive 390 Husqvarna
    AA Class

    Sorry, I was talking about the brake Pedal.
    cognitive 390, Oct 17, 2014
    #8

  9. dartyppyt Husqvarna
    Pro Class

    Location:
    Illinois
    Husqvarna Motorcycle:
    17 TE 150, 82CR 500
    Other Motorcycles:
    82 125,250,430&500 79 390 83 250
    Yes, it will work if you spacer it out. Also, adjustment bolt that hits swing arm bolt needs to be about 5mm longer.
    It looks good on there.

    Attached Files:

    dartyppyt, Oct 17, 2014
    #9

  10. cognitive 390 Husqvarna
    AA Class

    Thanks, will try and let you know.
    cognitive 390, Oct 17, 2014
    #10