1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

82 Cr flywheel weight

Discussion in 'Vintage/Left Kickers' started by Eurofreak, Jun 26, 2018.

  1. Eurofreak Husqvarna
    AA Class

    Location:
    Western NY
    Husqvarna Motorcycle:
    1986 TE 510, 1982 CR250, 2008 WR250
    Other Motorcycles:
    70's Triumph , Bultaco , Maico, etc
    Does anyone know where to get one? Or who used to make them? Would a WR external flywheel ignition work? The Cr is too pipey on tighter courses
  2. GaryM Husqvarna
    AA Class

    Location:
    Austin, Tx
    Husqvarna Motorcycle:
    1981 430cr second 430 CR 500cr
    Other Motorcycles:
    1981 490 Maico
    Interesting question for us using Electrex and HPi igntions , they have a flywheel bolt on weight to internal flywheel available from HPI. I will have to weight this to see what it totals. I might have only one external motoplat flywheel unit somewhere goin to go and look for it. Final option have to look up Power Dynamo units to compare. Homework to do.
    Eurofreak likes this.
  3. Eurofreak Husqvarna
    AA Class

    Location:
    Western NY
    Husqvarna Motorcycle:
    1986 TE 510, 1982 CR250, 2008 WR250
    Other Motorcycles:
    70's Triumph , Bultaco , Maico, etc
    Regulatorrectifier,com has a complete ignition for a WR 250 for $230. Haven't found any flywheel weights to fit the internal rotor so far.
  4. jimspac Husqvarna
    Pro Class

    Location:
    Connecticut
    Husqvarna Motorcycle:
    82 250WR, 82 430WR, 84 250WR, 85 400
    Other Motorcycles:
    86 400WR, 82 Montesa Cota 349
    You can use the Motoplat mini 6 if you have the correct stub end. I say this because I have an 84 250CR crank that has the small taper.
  5. GaryM Husqvarna
    AA Class

    Location:
    Austin, Tx
    Husqvarna Motorcycle:
    1981 430cr second 430 CR 500cr
    Other Motorcycles:
    1981 490 Maico
    PM me for more infor if needed