1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

'80s front hub, right side speedo drive cap

Discussion in 'Vintage/Left Kickers' started by hawaii-rider, Mar 31, 2009.

  1. hawaii-rider Husqvarna
    AA Class

    Location:
    Graham Washington, Fort Moose
    Husqvarna Motorcycle:
    2018 TC250, 2015 TE300
    Other Motorcycles:
    04 CRF-270x, 95 CR500, 93 CR250 etc
    How in the :censored: to you get this off to get into the bearing on the right side of the front hub?

    I dont want to THOR the damn thing, so I figured I would ask here...
    :excuseme:

    Puller on the alum spacer

    ???

    bike in question:
    1983 XC500


    Thanx all!
    and yes, I just want in there to peek at the bearings, and check things...

    HR
    :cool:
    :usa:
    hawaii-rider, Mar 31, 2009
    #1

  2. luvwoods Husqvarna
    AA Class

    Location:
    Zoar, Ohio
    HR, are you trying to get into the speedo drive unit or get it off the wheel hub? I have an 84 WR with a speedo drive and when I pull the axle, the drive unit pops right off the wheel hub so I'm thinking you want to get into the drive unit itself??
    luvwoods, Apr 2, 2009
    #2

  3. hawaii-rider Husqvarna
    AA Class

    Location:
    Graham Washington, Fort Moose
    Husqvarna Motorcycle:
    2018 TC250, 2015 TE300
    Other Motorcycles:
    04 CRF-270x, 95 CR500, 93 CR250 etc
    What I am trying to do is "pop" that speedo drive cap off the hub so I can just get into and check out the wheel bearings.
    nothing more.

    Maybe I can post a picture of the evil device...
    :D


    Thanx

    HR
    :cool:
    :usa:
    hawaii-rider, Apr 3, 2009
    #3

  4. luvwoods Husqvarna
    AA Class

    Location:
    Zoar, Ohio
    Don't think I can help. My setup is different in that the speedo drive unit is not attached in any way to the wheel hub. It just gets clamped up next to it when the front axle is tightened.
    luvwoods, Apr 4, 2009
    #4