630 fuel line removal

Discussion in '610/630' started by nix296, May 11, 2020.

  1. nix296 Husqvarna
    AA Class

    Hey riders, I want to remove my fuel tank and am looking for the technique for removing the fuel line connecters without breaking them. Thanks in advance.
  2. KayDubbya Husqvarna
    AA Class

    Location:
    B.C.
    Husqvarna Motorcycle:
    2011 TE630
    Other Motorcycles:
    BMW F650GS
    Patience! It's a frustrating experience every time.
    You have to press the white button on the quick release fitting while you push the connector towards the tank. Once you have the button depressed you be able to pull the fittings apart.

    Easier days then done, but it will come apart.

    I find that screaming and cursing at it relieves some of the tension, but YMMV. Good luck.
  3. nix296 Husqvarna
    AA Class

    Thanks. I've put a couple on ice for the celebration or cursefest.
    KayDubbya likes this.
  4. Oldscool Husqvarna
    AA Class

    Location:
    South Australia
    Husqvarna Motorcycle:
    None
    Other Motorcycles:
    RM125, SWM RS500R & Superdual
    It may be easier to remove the hose from the injector rather than the tank (same technique required).
    Rotax_655 likes this.