Picked up a clean `08 SM610 a while back with a complete Ti LV on it. I like the sound but where I ride it would be beneficial for me if I could drop a few decibels when on the throttle. I've seen dual mufflers setups on various other Husqvarna's, was there ever a DM setup offered for the 610? Does having dual mufflers tone down some of the upper RPM bark? I'm not trying to make it quiet just quieter.
Negative, I do not. My experience with DBK inserts on other bikes has not been positive. I might have to give it look though. Thanks
The LV with the DB killer in an '08 TE610 isn't much louder than the old twin pipe kickstart models I had in the '90s.
If you have the ti end cap (four bolts hold it on), we've got them. $45 plus shipping. If you have the carbon end cap (it slides in and is retained with a snap ring), we have them, $65 plus shipping. 888-806-1153 I took the db killer out of my 610's LV muffler, it was unbearable on the road and lasted about ten minutes. Back in it went.
We're now out of the db killer for the carbon end cap mufflers (Thanks for your order 1 wheel peel!), we do have two db killers left for the ti end cap mufflers. Both of these are the "short exit" version which allows for the spark arrestor screen to go over the db killer.