• 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
     TE = 4st Enduro & TC = 4st Cross

  • Hi everyone,

    As you all know, Coffee (Dean) passed away a couple of years ago. I am Dean's ex-wife's husband and happen to have spent my career in tech. Over the years, I occasionally helped Dean with various tech issues.

    When he passed, I worked with his kids to gather the necessary credentials to keep this site running. Since then (and for however long they worked with Coffee), Woodschick and Dirtdame have been maintaining the site and covering the costs. Without their hard work and financial support, CafeHusky would have been lost.

    Over the past couple of weeks, I’ve been working to migrate the site to a free cloud compute instance so that Woodschick and Dirtdame no longer have to fund it. At the same time, I’ve updated the site to a current version of XenForo (the discussion software it runs on). The previous version was outdated and no longer supported.

    Unfortunately, the new software version doesn’t support importing the old site’s styles, so for now, you’ll see the XenForo default style. This may change over time.

    Coffee didn’t document the work he did on the site, so I’ve been digging through the old setup to understand how everything was running. There may still be things I’ve missed. One known issue is that email functionality is not yet working on the new site, but I hope to resolve this over time.

    Thanks for your patience and support!

610 Cam Chain Replacement tools 2006. Puller Mainly

chamber66

chamber66

Husqvarna
AA Class
I looking at changing the cam chain on my 2006 610
Can so.eone tell me what tools/parts are needed
I have found this on the web

800058541 --> Husky Cam Chain $95.95
38010019 --> Motion Pro Flywheel Puller (labeled YFM, 35mm X 1.5mm) R.H.$38.99 unless ya want the one from husky which is around $100
800063644 --> Waterpump Gasket$4.99
161503601 --> Valve cover Gasket x2 $2.99

bt I have also found the the puller is
28 x1.5 male rh

can someone confirm the size please. And anything else im likely to need?
TIA
 
Also found this so really confused now

www.thumpertalk.com

610 flywheel puller

Does anybody know what size the 2006 SM610 flywheel puller is? All I can find is a 26mm X 1.0 RH, flywheel thread is external, this is for the 250/450/510 and it is to small. I don't have a set of calipers to measure it. I can't find any documents on what should fit it. After 3 wrong pullers from...
www.thumpertalk.com www.thumpertalk.com
 
You should also replace the water pump shaft seal and the cam bearings. The cam bearings are a standard size c3 explorer skf bearings.

While you're in there, check your rocker bearings and bushings.

I made a puller and I have a crank sitting in the workshop, I'll go measure it.
 
Bahr said:
You should also replace the water pump shaft seal and the cam bearings. The cam bearings are a standard size c3 explorer skf bearings.

While you're in there, check your rocker bearings and bushings.

I made a puller and I have a crank sitting in the workshop, I'll go measure it.
Click to expand...
Yesbi intend to do all that
Justbi can't find a definitive answer as to what size pullerbi need.
P.s huge fan f sky a d fag bearings
 
You must log in or register to reply here.
Back
Top