449 Gear Shifter

IMS does not make a shifter and neither does Zipty.

I have ordered the Driven and will give it a try.

Tinken did make a good suggestion. and that is to clean and locktite the splines.



Unfortunately, we do not have any right now that would fit at this time. At one point, we were going to try to make one of our other levers work, but were unsuccessful with that. If something changes, we will let you know.

Thanks,
Mario
IMS Products

So, I miss ordered somehow and got the wrong Driven shifter. I decided to order a stock one to get my bike moving. in the process Driven has sent me the correct shifter, but already was trying the loctite with the stocker.

the Driven is nice looking. seems stronger and it has one more ring on the toe. It extends out a little more than stock. this seems like it will be nice and provide better shifting. Will wait to change them out.

I ordered the driven piece. It will not disappoint. Cheers

Part # for the Driven shifter? I need one.

I have been running one of these from about 18 months of hard work. It has been great.
The splines are much better cut than the factory item (which only has splines either side of the through bolt)
They are well made & well priced.

http://www.ebay.com.au/itm/Alloy-Ge...012-2013-Husky-TE-449-511-Shift-/111607484218

Driven PN DASC-89 is correct PN. perfect fit, duplicate of factory original except folding tip is a little longer, and splines are cut all the way through. Also, only around $35. Very satisfied with my purchase.

The driven one looks very much like the one I posted, but anodised