420 Auto - Obscure Engine Part Needed

I'm working on bringing a 420 Auto back to life. A part I'm having a heck of a time locating is the rubber "Lever Support", part # 16 11 187-01. The part is roughly a 1" x 3" rubber part molded with a "D" and "N" and is attached to a bracket on the transmission cover. The piece supports the transmission lever.


I've checked with TriTrophy, Husqvarna-Parts, Halls Husky and HVA Factory - no luck. Do one of you guys have a source for parts like this, or maybe even a good used one you'll part with?

Thanks for any help you can give me.

Scott

It doesn't actually do anything . The lever doesn't rest on it . Or locate the lever etc . But yea gl finding one . Surely there's one stuck to some rotten old cases somewhere

Is this the rubber block on the clutch cover that stops the kick starter? One block is glued straight kicker and the other has a facing up "C" that holds the crooked kick starter. Might have to make one. I glued one on once.

no bill ...auto gear lever....

Thanks for the reply, and explaining how the piece works. I'd still like to complete the motor, particularly after all the work I've put into it!

I'll keep looking - if any of you guys have a source please let me know.

Thanks,
Scott

Scott, I have this rubber part you need. You can send me a PM if you want.

Marty

Found one in the shed as well!!

Thanks Stormer254! I've PMed Marty and have one on the way! What a great forum!

Scott

I thought I'd push my luck on my 420 Auto rebuild and ask if anyone has a source for the primary clutch spring cover like the picture below (I realize that's not a 420, but it shows the concept).



Thanks,
Scott

A chap on Evil bay sells them for $50, he is in Germany but I think postage is included gritzner is his ebay identity.