1. Husqvarna Motorcycles Made In Sweden - About 1988 and older

250 Mag Motor in a 125 MK Frame

Discussion in 'Vintage/Left Kickers' started by Vinskord, Apr 6, 2017.

  1. Vinskord Husqvarna
    AA Class

    Husqvarna Motorcycle:
    400 CR
    Any chance a 74 thru 77 250 Mag motor will fit in a 125 MK frame? The distance between the front and rear frame motor mounts is about 30mm shorter than my 400 MK frame. I don’t have a 250 Mag motor yet to do a test fit.
    Vinskord, Apr 6, 2017
    #1

  2. Jeff B Husqvarna
    AA Class

    Husqvarna Motorcycle:
    1975wr 250
    Other Motorcycles:
    yamaha ty 175,
    Call John Lafever. It think he has done it.
    Jeff B, Apr 6, 2017
    #2

  3. auto Husqvarna
    AA Class

    Location:
    NJ,USA
    Husqvarna Motorcycle:
    too many
    pretty sure no.Not sure what your looking for,but geometry is the same except for the angle on the front down tube.So even if it fit with custom front motor mounts your cylinder would interfere with the down tube.
    auto, Apr 6, 2017
    #3

  4. dmcoz Husqvarna
    AA Class

    Husqvarna Motorcycle:
    1974 CR250, 125 2003 TE250
    Yes they do - just need to make new front engine mount plates and a little tweaking around the aircleaner bell. Very simple transplant. And no, cylinder doesn't hit the front down tube. When we did it we also were making a custom pipe anyhow, but in reality fit was pretty close with a stock pipe.
    dmcoz, Apr 6, 2017
    #4