1. 2 Stroke Husqvarna Motorcycles Made In Austria - About 2014 & Newer
    TE = 2st Enduro & TC = 2st Cross

TE/TC 2016 husky plastics

Discussion in '2st' started by HS507, Jun 5, 2017.

  1. HS507 Husqvarna
    A Class

    Location:
    NE Ohio
    Husqvarna Motorcycle:
    Te 300
    Other Motorcycles:
    Yz450,crf150r,crf100f,crf50f
    Just replaced side radiator shroud plastics, one race and right side is cracked and broke away from tank?!! Only layed it down couple times. I swear these OEM are more brittle than factory at dealer. Anyone experience this crap plastics? Any solutions other than not laying bike down ever??
  2. fletchman45 Husqvarna
    Pro Class

    Location:
    park rapids
    I had a 15 and a 17 husky... No issues at all seemed way better then the red bikes. One broken shroud after a hard tree crash... While the Italian generation xlite chassis bikes I literally had stacks of broken shrouds(mostly from the bike being made to wide in front.
  3. NH-JP 2nd Fastest Old, Slow Guy!

    Location:
    New Hampshire
    Husqvarna Motorcycle:
    2017 TE300
    Other Motorcycles:
    1988 Honda Hurricane,
    To be honest, I pull the stock plastics off and save them for resale.
    The stock shrouds with the ipd graphics are worth saving. I buy a set of acerbis plastics and put my race numbers on them.
    That way I don't sweat beating them up. Full set costs under $120.00.
    The stock shrouds cost $90.00 plus alone.
    fletchman45 likes this.
  4. fletchman45 Husqvarna
    Pro Class

    Location:
    park rapids
    That's a good idea. I'm spoiled with in mold graphics and hate decals peeling if you get a discount in the stock plastic I just run that then buy a set for resale ...