2012 cr125 rear wheel on 2013 txc250r

Does anyone know if this will fit or what needs to be done to make it fit correctly?

I have a 2013 txc250r and have a 1.85x19 rear rim.

I want to swap it to a 2.15x19 and am having a ton of trouble finding a rim to lace up.

I found a couple 2 stroke wheel sets but need to make sure they will fit before I buy it.

The 125 wheels should fit but the 250/300 wheels would have alignment issues.

Something to look into is the machined hub wheels after 2010 should use regular jap pattern hoops. I replaced a rear hoop on my old '11 txc 250 with one listed as fitting a pile of yamahas from 2000+

This isn't true for all huskys, but some 2011 and newer do use japanese indexing.

How would I know if it will fit a Yamaha or other rim?

My bike is a 2013 TXC 250 R.

I have a spare hub I planned to make a flat track wheel set out of but went a different route, so I have a brand new hub to lace up. I just can't seem to get a suitable 2.15 X 19 rim and spokes for it for a reasonable price or know it will actually fit for that matter. My new hub is pictured below and is part number 8000 H1368 . It looks cast and machined after. So I don't know if this is that same as you are talking about.

I tried to buy a cheap warp 9 rim, but they told me it wouldnt fit....

When I had my 10 tc250 I swapped wheels between my 12 cr125. The 125s front axle needs to be swapped too.

That is the same hub my '11 had. I just reused the spokes when I replaced the old hoop (cracked) so I can't help you there. The hoop I used was an Excel for a yami.

My spokes are fine so i will try to see if i can get a yamaha hoop and lace it in.

My issue is its a 1.85 x 19 and it isnt good for the type of riding I do. I need a 2.15 x 19.

It has been terrible for ice racing just too narrow.