1. 4 Stroke Husqvarna Motorcycles Made In Italy - About 1989 to 2014
    TE = 4st Enduro & TC = 4st Cross

2011 TE250 Warm Start Issue

Discussion in '4 Stroke' started by Bruce A, Jul 22, 2014.

  1. Bruce A Husqvarna
    A Class

    Husqvarna Motorcycle:
    TE 250
    Just wondering if anyone else has had anything like this. Bike starts fine cold runs great and starts fine hot. But if it has been hot and then sits for a few min it is hard to start. The starter cranks normally but it won't turn over. It takes several min of on and off cranking to get it going. It is acting like it is flooded but I don't see how that would be the case with FI. Any thoughts?
  2. R_Little Husqvarna
    Pro Class

    Location:
    NJ
    Left exhaust valve too tight or the starter gears are worn.

    There is a starter gear update for that bike.